UL Listed 12V 5A Universal Monitor 60W Desktop External AC Power Adapter

Product Description

GENERAL INFORMATION

Now you're seeing a ready made standard external switch mode power supply adapter charger for indoor diverse applications (usually it's an essential accessory to power electronics), IEC62368 standard complied "UL listed 12V 5A universal monitor 60W desktop external AC power adapter", it is a highly reliable safe power supply certified by UL, cUL, FCC, CE, GS, UKCA, PSE, fits for but not restrict to applications such as IT, ITE, ICT, and often-seen daily life devices. With its supreme durability, MTTF more than 50000 hours, it will help to reduce your cost on power need. As you can see, it can be installed with C8 C6 or C14 inlet for AC input, you can also choose unremovale AC power cord version. On top of that, you can easily define the output ranging from 9V to 25V, with current 0.01Amp to 6.0Amp. 

Key features:
* Wide voltage input (90-264Vac)
* limited power source approved
* Universal and international (certified by UL, cUL, FCC, CE, GS, UKCA, PSE, SAA, CCC)
* Low ripple, noise cancellation, friendly to Hi-Fi audio equipments
* Supreme safe (Fully protected by OCP, OVP, OLP, SCP, UVLO)
* High power density, high energy efficiency, level VI of DOE, ERP and COC Tier 2
* MTTF>50,000 hours
* Classical desktop 3pins (C6 C14 inlet), or 2pins (C8 inlet)
* Low cost
* Customizable

WARNING: UL Listed Products - the product has successfully met stringent requirements.  Don't buy potentially inferior or dangerous chargers that can harm your devices or even worse!!!

 

APPLICATIONS

AS an essential power accessory, universal & replacement, meets standard 62368, fits for applications but not limited to,
LCD
Drones
Laptop
Printer
NAS storage
ICT (information & communications technology) equipments
ITE (Information technology equipments)
Power tools
Pump
Incubator
External SSD
Musical instruments, such as keyboard.
Astronomical telescopes
Electric recliner chair
Digital signage
Audiovisual 
And...... so on

By and large, it energizes all electric devices these are running on 12V 5A DC power, wanna a different spec beside this? As long as you know the exact voltage and current the device needs, you can leave the rest to us.



                                                                         

Product Parameters

                                                                  Information you may be eager to know              
INPUT CHARACTERISTICS
The power supply shall operate among the voltage ranges as follows:

Rated input voltage	100-240Vac
Operating range	90-264Vac
Rated input frequency	50/60Hz
Variation Frequency	50/60Hz +/- 3Hz
Rated input current	1.5 A Max.
Primary current protection	An adequate internal fuse on the AC input line is installed
Power consumption (no loading)	0.21W Max. (Input voltage 115V and 230V)
Configuration	Class I Conductor

OUTPUT REQUIREMENTS

Dc output voltage	12V
Minimum load current	0A
Rating load current	5A
Rating output power	65.0W
Line regulation	The line regulation is less than ±3% while measuring at rated load and ±10% of input voltage changing.
Load regulation	The load regulation for +12V is less than ±5%, at measured output load from 0% to 100% rated load .

Ripple and noise	150mVp-p Max.
	At 115/230Vac input and output Min and Max.Load, the ripple and noise are as follows when measure with Max. Bandwidth of 20MHz and Parallel 47uF/0.1uF, crossed connected at testing point.
Average Efficiency	88.00% Min, At 115/230Vac input voltage,1/4,1/2,3/4 and full load calculation average efficiency. Adaptor meet efficiency level VI of DOE and Erp.
10% Load Efficiency	78.00%Min At 115/230Vac input voltage,10% load efficiency.
Turn on delay time	3Second Max.at 115Vac-230Vac input and output Max.load.
Rise time	20 mS Max.at 115Vac input and output Max load.
Hold up time	10 mS Min.at 115Vac input and output Max.Load.
Over-shoot	10% Max.When power supply at turn off/on.
Over voltage protection	The power supply shall be hiccup mode, when the output is over voltage, and the power supply shall not be damaged and shall be self-recovery when the fault condition is removed.
Over current protection	The power supply will be auto recovered when over current faults remove.
Short circuit protection	The power supply will be auto recovered when short circuit faults remove.

ENVIRONMENTAL REQUIREMENTS

Temperature	Operating/:           0^oC +45 ^oC
	Non-Operating/:      -20^oC +80^oC
Humidity	Operating:       10%~90% (Non Condensing)
	Non-Operating:   10%~90% (Non Condensing)

Safety Requirements and Certification

For short	Country	Certified Status	Standard
GS	Europe	MEET	EN 62368-1
CE	Europe	MEET	EN 62368-1
UL	USA	MEET	UL 62368-1
CUL	Canada	MEET	CAN/CSA C22 2 NO.62368-1-14
FCC	USA	MEET	FCC PART15
UKCA	Britain	MEET	BS EN62368-1
PSE	Japan	MEET	J62368-1
SAA	Australia	MEET	AS/NZ 62368.1

REGULATORY COMPLIANCE 
EMC Specifications/EMC, the external power supply must meet all specification in this section

Radiated and Conducted Emission	EN55032, Class B for radiated and conducted emissions FCC part 15: Class B for radiated and conducted emissions. GB9254, GB17625.1
Electrostatic Discharge Immunity	EN 61000-4-2 Air Discharge:  ±8kV Contact Discharge: ±4kV Performance Criteria B Electrostatic-discharge test by contract or air should be conducted with Static-discharge tester, energy storage capacitance of 150pF, and discharge resistance of 330Ω, 8KV air discharge, 4KV contact discharge.
Radiated Field Immunity	EN 61000-4-3 Frequency Range:  80-1000MHz Field Strength: 3 V/m with 80% amplitude modulation of 1 kHz Performance Criteria A Radio-frequency electromagnetic field susceptibility test, RS 80-1000MHz, 3V/m, 80%AM(1KHz)
Fast Transient Immunity	EN 61000-4-4 Power line:  1kV Signal line: 0.5kV Performance Criteria B
Surge Immunity	EN 61000-4-5 1.2/50 usec Open Circuit voltage 8/20 usec Short Circuit current Power line: 1kV Line to Earth: 2kV Lightning Surge Voltage shall be applied in differential and common mode to AC input lines and cross primary ac input and secondary GND

DELIVERY MATERIAL SIZE

Power adapter size information:  
Size: 120 x 54 x 33mm
Case cover & chassis materia: PC
AC PIN MATERIAL/AC: BRASS
Weight: about≈250.0g
Color: Black
LED: Green
ROHS 2.0

Carton demonstration, standardized factory packing demonstration
Packing, here is the default factory packing, we can do the packing per customer instruction as well.

Die-cut partition A size	471x76x2mm (Length, height, thickness)
Die-cut partiton B size	387x76x2mm (Length, hight, thickness)
Paper panel size	470x390mm (Length, width)
Carton size	490x405x260mm (Length, width, height)

Each carton contains 54pcs, 3 layers, and each layer arraies 3x6
Gross weight: ≈14.1kg
Cube: 0.05 per carton

                                        

CUSTOMIZATION

CUSTOM OPTIONS
Custom output voltage and current please see the following sheet

Output voltage VDC	Output current Amp	Max ouput power Wattage
9.0-11.9	0.01-6.0	54W
12.0-17.0	0.01-5.0	65W
17.1-25.0	0.01-4.2	72W

The things you can define at will, however should comply with related safety certificate
3pins IEC14 or IEC6 inlet, 2pins IEC8 for AC input, or you can choose AC unremovale version * The price of AC cord fixed version please contact us, because we don't produce AC cord, moreover, the cost of AC cord keeps floating periodically.
DC cable type
DC cable length
AC plug and AC cord length (If AC unremovale version is selected)
DC connector
Nameplate information
Packing means

Complete tailord power supply
All we need is the details of your idea and requirements, then we will redesign accordingly.

COMMERCIAL TERMS

Commercial terms and conditions
MOQ: 1000pcs
L/T: 30 working days
Incoterm: EX-works
Warranty: 12 months

WE HELP, WE RESOLVE

Testimonial

We're partnering with some strong brand carriers, Whilrpool, Vodafone, Seiko, Sharp, and they entitled us as "class A vendor".  We keep developing new partnerships worldwide, actively participate in innovative projects, to continuously contribute our value to customer's operations.

We would like to ask you:
Has your company encountered or is being troubled by any of the following issues caused by external power adapters directly or indirectly?
1. Insufficient power output, leading to device malfunctions.  
2. Overheating adapters, posing fire hazards.  
3. Inadequate protection mechanisms, risking explosions or electric shock accidents.  
4. Short product lifespan, requiring frequent replacements.  
5. High cost of OEM (original) power supply, necessitating cost efficient alternatives.  
6. Non-compliance with safety regulations, hindering market entry for your devices.
7. Excessive ripple noise, degrading audio equipment sound quality unplesantly. 
8. Electromagnetic interference, reducing touchscreen responsiveness.  
9. Overwhelming options, struggling to identify reliable suppliers.  
 
If any of these resonate with your situation, we're here to help. A single telephone-communication or email or message can resolve your issues with our tailored solutions.  


 

OUR FACTORY OUR HOME

Factory, philosophy

We're a reputable leading manufacturer has been devoting to external power supply (switch mode power supply unit, power adapter, charger) under the ISO9001 criteria for more than 15 years, our existing standardized products ranging from 1w to 360w, with output DC 5V to 55V, 0,01A to 16A, including wall mount, desktop, AC plug interchangeable. All products are certified by 62368 UL, cUL, FCC, CE, GS, UKCA, SAA, KC, PSE, moreover, we are proud to announce that our 240W GaN model carries IEC60601 CB report, which is ideal for medical grade application. Additionally, we offer customization service to meet different customer demand, our tailored power solutions have successfully added value to customers' unique and innovative projects, operations, greatly elevate the safety of the power adapter, procurement efficiency, significantly raise customer's competitivenss. Our enterprise philosophy is developed based on a strategy that is aiming to achieve the sustainability, meeting customers' demand is the paramount, the only thing that will satisfy our cutomers is the QUALITY, and our eternal duty is to deliver POWER. You can find us at the address No.124, Minsheng industry park, ShangCun Community, Guangming district, Shenzhen, Guangdong. We're always ready for your visit and inspection.

 

Thank you for browsing, together, we can forge a bright future, and now, we're ready to answer your questions.