Universal 12V 2.5A DC Wall Plug in Power Supply Adapter Mains Plug

Product Description

 

General introduction

Now you're seeing a ready made standardized external switch mode power supply adapter wall mount charger for indoor diverse applications, IEC62368 standard complied "Universal 12V 2.5A DC wall plug in power supply adapter battery charger mains plug", you can easily define the output ranging from 5V to 25V, with current 0.01Amp to 4.0Amp. 

Key features:
* Universal input (90-264Vac)
* Universal and international (certified by UL, cUL, FCC, CE, GS, UKCA, SAA, PSE, CCC)
* Low ripple, noise cancellation, friendly to Hi-Fi audio equipments (70mV p-p or even lower)
* Supreme safe (Fully protected by OCP, OVP, OLP, SCP, UVLO)
* High efficiency, level VI of DOE, ERP and COC tier 2
* MTTF>50,000 hours
* Classical wall mount 2pins with detachable plug adapters
* Customizable

Warning: UL Listed Products - the product has successfully met stringent requirements.  Don't buy potentially inferior or dangerous chargers that can harm your devices or even worse!!!


 

Applications

* Consume electronics
* Instrumentation
* Technology
* Home appliances
* Gadgets

AS an essential power accessory, universal & replacement, meets standard 62368, fits for applications but not limited to,
Drones
Label printer
ICT (information & communications technology) equipments
ITE (Information technology equipments)
Power tools
Router
Dehumidifier
Humidifier
Musical instruments
Astronomical telescopes
Audiovisual 
And...... so on

By and large, it energizes all electric devices these are running on 12V 2.5A DC power, wanna a different spec? As long as you know the exact voltage and current the device needs, you can leave the rest to us.



                                                                         

Product Parameters

                                                                  Information you may be eager to know              
INPUT CHARACTERISTICS
The power supply shall operate among the voltage ranges as follows:

Rated input voltage	100-240Vac
Operating range	90-264Vac
Rated input frequency	50/60Hz
Variation Frequency	50/60Hz +/- 3Hz
Rated input current	0.7 A Max.
Primary current protection	An adequate internal fuse on the AC input line is installed
Power consumption (no loading)	0.1W Max. (Input voltage 115V and 230V)
Configuration	Class II Conductor

OUTPUT REQUIREMENTS

Dc output voltage	12.0V
Minimum load current	0A
Rating load current	2.5A
Rating output power	30.0W
Line regulation	The line regulation is less than ±5% while measuring at rated load and ±10% of input voltage changing.
Load regulation	The load regulation for +24V is less than ±5%, at measured output load from 0% to 100% rated load .

Ripple and noise	120mVp-p Max.
	At 115/230Vac input and output Min and Max.Load, the ripple and noise are as follows when measure with Max. Bandwidth of 20MHz and Parallel 47uF/0.1uF, crossed connected at testing point.
Average Efficiency	86.95% Min, At 115/230Vac input voltage,1/4,1/2,3/4 and full load calculation average efficiency. Adaptor meet efficiency level VI of DOE and Erp.
10% Load Efficiency	76.95%Min At 115/230Vac input voltage,10% load efficiency.
Turn on delay time	3Second Max.at 115Vac-230Vac input and output Max.load.
Rise time	20 mS Max.at 115Vac input and output Max load.
Hold up time	10 mS Min.at 115Vac input and output Max.Load.
Over-shoot	10% Max.When power supply at turn off/on.
Over voltage protection	The power supply shall be hiccup mode, when the output is over voltage, and the power supply shall not be damaged and shall be self-recovery when the fault condition is removed.
Over current protection	The power supply will be auto recovered when over current faults remove.
Short circuit protection	The power supply will be auto recovered when short circuit faults remove.

ENVIRONMENTAL REQUIREMENTS

Temperature	Operating/:           0^oC +40 ^oC
	Non-Operating/:      -20^oC +80^oC
Humidity	Operating:       10%~90% (Non Condensing)
	Non-Operating:   10%~90% (Non Condensing)

Safety Requirements and Certification

For short	Country	Certified Status	Standard
GS	Europe	MEET	EN 62368-1
CE	Europe	MEET	EN 62368-1
UL	USA	MEET	UL 62368-1
CUL	Canada	MEET	CAN/CSA C22 2 NO.62368-1-14
FCC	USA	MEET	FCC PART15
UKCA	Britain	MEET	BS EN62368-1
SAA	AU	MEET	SAA:AS/NZS 62368.1
PSE	Japan	MEET	J62368-1

REGULATORY COMPLIANCE 
EMC Specifications/EMC, the external power supply must meet all specification in this section

Radiated and Conducted Emission	EN55032, Class B for radiated and conducted emissions FCC part 15: Class B for radiated and conducted emissions GB9254, GB17625.1
Electrostatic Discharge Immunity	EN 61000-4-2 Air Discharge:  ±8kV Contact Discharge: ±4kV Performance Criteria B Electrostatic-discharge test by contract or air should be conducted with Static-discharge tester, energy storage capacitance of 150pF, and discharge resistance of 330Ω, 8KV air discharge, 4KV contact discharge.
Radiated Field Immunity	EN 61000-4-3 Frequency Range:  80-1000MHz Field Strength: 3 V/m with 80% amplitude modulation of 1 kHz Performance Criteria A Radio-frequency electromagnetic field susceptibility test, RS 80-1000MHz, 3V/m, 80%AM(1KHz)
Fast Transient Immunity	EN 61000-4-4 Power line:  1kV Signal line: 0.5kV Performance Criteria B
Surge Immunity	EN 61000-4-5 1.2/50 usec Open Circuit voltage 8/20 usec Short Circuit current Power line: 1kV Line to Earth: 2kV Lightning Surge Voltage shall be applied in differential and common mode to AC input lines and cross primary ac input and secondary GND

 

Delivery, material, size

Power adapter size information:  

Size: 71.3x43.3x38.5mm
Case cover & chassis materia: PC
AC PIN MATERIAL/AC: BRASS
Weight: about≈110g
Color: Black

LED: Green

ROHS 2.0

Carton demonstration, standardized factory packing demonstration
Packing, here is the default factory packing, we can do the packing per customer instruction.

Die-cut partition A size	474x115x2mm (Length, height, thickness)
Die-cut partiton B size	387x115x2mm (Length, hight, thickness)
Paper panel size	470x390mm (Length, width)
Carton size	490x405x260mm (Length, width, height)

Each carton contains 90pcs, 2 layers, and each layer arraies 5x9
Gross weight: ≈10.5kg
Cube: 0.05 per carton

                                        

Customization

CUSTOM OPTIONS
Custom output voltage and current please see the following sheet

Output voltage VDC	Output current Amp	Max ouput power Wattage
5.0-5.9	0.01-4.0	20W
6.0-7.9	0.01-4.0	24W
8.0-15.9	0.01-3.0	30W
16.0-25.0	0.01-1.87	30W

The things you can define at will, however should comply with related safety certificate
Detachable AC plug adapters
DC cable type
DC cable length
DC connector
Nameplate information
Packing means

Complete tailord power supply
All we need is the details of your idea and requirements, then we will redesign accordingly.

Commercial

Commercial terms and conditions
MOQ: 1000pcs
L/T: 30 working days
Incoterm: EX-works
Warranty: 12 months

 

Factory life

 

Contact us

We would like to ask you:
Has your company encountered or is being troubled by any of the following issues caused by external power adapters directly or indirectly?
1. Insufficient power output, leading to device malfunctions.  
2. Overheating adapters, posing fire hazards.  
3. Inadequate protection mechanisms, risking explosions or electric shock accidents.  
4. Short product lifespan, requiring frequent replacements.  
5. High cost of OEM (original) power supply, necessitating cost efficient alternatives.  
6. Non-compliance with safety regulations, hindering market entry for your devices.
7. Excessive ripple noise, degrading audio equipment sound quality unplesantly. 
8. Electromagnetic interference, reducing touchscreen responsiveness.  
9. Overwhelming options, struggling to identify reliable suppliers.  
 
If any of these resonate with your situation, we're here to help. A single telephone-communication or email or message can resolve your issues with our tailored solutions.  

Together, we can forge a bright future! Thank you for browsing, And we're ready to answer your questions.