| Customization: | Available |
|---|---|
| Usage: | Laptop, Mobile Phone, Game Player, Digital Camera, Phone, Display, to Provide DC Power to Device Has Specified Demand |
| Output Type: | DC |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Now you're seeing a standardized external power supply/AC adapter/Mains adaptor/Charger adapter/Wall adapter, for indoor use only, compatible with any electric device requires specified DC power. IEC62368 standard complied, "18W 5V 1A globally compatible wall mount AC DC power converting adapter" concretely works with Phones, tablet PC, small bluetooth speakers, wireless modems, and other often-seen small electronics. If this specific spec doesn't fit for your application, however the 18W is a correct wattage, you can easily define the output ranging 5Vdc - 25Vdc, with amperage 0.01Amp - 3Amp.
Key features:
- Universal input 90Vac - 264Vac
- Global compatibility, certified by safety certificates, UL, cUL, FCC, CE, SAA, PSE, CCC
- Low ripple, noise cancellation, friendly to Hi-Fi audio equipments (70mV P-P or even lower)
- Harzard-free, fully protected by OCP, OVP, SCP, OLP, and UVLO
- High power intensity, high energy efficiency, level VI of DOE, ERP and COC Tier 2
- MTTF>50000 hours
- Classical wall mount design, class II 2pins
- Customizable
Before any practical action, we would present a WARNING, UL listed products, all our products have successfully met stringent requirments. DO NOT buy potentially inferior or dangerous chargers, adapters that can harm your device or even worse!
- Consumer electronics
- Instrumentation
- Technology
- Home appliances
- Electric Gadgets
..... And more.
Concretely, as an essential power accessory, with tag "universality & replacement", meet standard 62368, fits for applications but not restrict to
- Lable printers
- Small drones
- Diverse ICT (Information & communications Technology) devices
- Diverse ITE (Information Technology Equipment) devices
- Router
- Modem
- Humidifier
- Dehumidifier
- Musical instrument
- Audiovisual
......any device that has a specified requirement.
Again, it converts mains AC to DC current for all devices these are running on exact 5V 1A DC power. If you have a device that is using a special spec, let us know the details of the exact voltage and amperage, then you can leave all the best to us.
We would like to ask you,
Has your company encountered or is being troubled by any of the following issues caused by external power adapters directly or indirectly?
1. Insufficient power output, leading to device malfunctions.
2. Overheating adapters, posing fire hazards.
3. Inadequate protection mechanisms, risking explosions or electric shock accidents.
4. Short product lifespan, requiring frequent replacements.
5. High cost of OEM (original) power supply, necessitating cost efficient alternatives.
6. Non-compliance with safety regulations, hindering market entry for your devices.
7. Excessive ripple noise, degrading audio equipment sound quality unplesantly.
8. Electromagnetic interference, reducing touchscreen responsiveness.
9. Overwhelming options, struggling to identify reliable suppliers.
If any of these resonate with your situation, we're here to help. A single telephone-communication or email or message can resolve your issues with our tailored solutions.
Information you may be eager to know
INPUT
The power supply shall operate among the voltage ranges as follows
| Rated input voltage | 100-240Vac |
| Operating range | 90-264Vac |
| Rated input frequency | 50/60Hz |
| Variation Frequency | 50/60Hz +/- 3Hz |
| Rated input current | 0.5A Max. |
| Primary current protection | An adequate internal fuse on the AC input line is installed |
| Power consumption (no loading) | 0.1W Max. (Input voltage 115V and 230V) |
| Configuration | Class II Conductor |
OUTPUT REQUIREMENTS
| Dc output voltage | 5.0V |
| Minimum load current | 0A |
| Rating load current | 1.0A |
| Rating output power | 5W |
| Line regulation | The line regulation is less than ±5% while measuring at rated load and ±10% of input voltage changing. |
| Load regulation | The load regulation for +5V is less than ±5%, at measured output load from 0% to 100% rated load . |
| Ripple and noise | 200mVp-p Max. |
| At 115/230Vac input and output Min and Max.Load, the ripple and noise are as follows when measure with Max. Bandwidth of 20MHz and Parallel 47uF/0.1uF, crossed connected at testing point. | |
| Average Efficiency | 85% Min, At 115/230Vac input voltage,1/4,1/2,3/4 and full load calculation average efficiency. Adaptor meet efficiency level VI of DOE and Erp. |
| Turn on delay time | 3Second Max.at 115Vac-230Vac input and output Max.load. |
| Rise time | 100 mS Max.at 115Vac input and output Max load. |
| Hold up time | 10 mS Min.at 115Vac input and output Max.Load. |
| Over voltage protection | The power supply shall be hiccup mode, when the output is over voltage, and the power supply shall not be damaged and shall be self-recovery when the fault condition is removed. |
| Over current protection | The power supply will be auto recovered when over current faults remove. |
| Short circuit protection | The power supply will be auto recovered when short circuit faults remove. |
| Temperature | Operating/: 0 oC +45 oC |
| Non-Operating/: -20 oC +80 oC | |
| Humidity | Operating: 10%~90% (Non Condensing) |
| Non-Operating: 10%~90% (Non Condensing) |
| For short | Country | Certified Status | Standard |
| CE | Europe | MEET | EN 62368-1 |
| GS | German | MEET | EN 62368-1 EN 61558-1 |
| UL | USA | MEET | UL 62368-1 |
| CUL | Canada | MEET | CAN/CSA C22 2 NO.62368-1-14 |
| FCC | USA | MEET | FCC PART15 |
| SAA | AU | MEET |
SAA:AS/NZS 62368.1
|
| PSE | Japan | MEET | J62368-1 |
| Radiated and Conducted Emission | EN55032, Class B for radiated and conducted emissions FCC part 15: Class B for radiated and conducted emissions GB9254, GB17625.1 |
| Electrostatic Discharge Immunity |
EN 61000-4-2
energy storage capacitance of 150pF, and discharge resistance of 330Ω, 8KV air discharge, 4KV contact discharge. |
| Radiated Field Immunity |
EN 61000-4-3 Frequency Range: 80-1000MHz Field Strength: 3 V/m with 80% amplitude modulation of 1 kHz Performance Criteria A Radio-frequency electromagnetic field susceptibility test, RS 80-1000MHz, 3V/m, 80%AM(1KHz) |
| Fast Transient Immunity |
EN 61000-4-4
|
| Surge Immunity |
EN 61000-4-5
lines and cross primary ac input and secondary GND |
Power adapter size information:
Size: 62x29x38.5mm
Case cover & chassis materia: PC
AC PIN MATERIAL/AC: BRASS
Weight: about≈86g
Color: Black
ROHS 2.0
| Die-cut partition A size | 470x45x2mm (Length, height, thickness) |
| Die-cut partiton B size | 390x95x2mm (Length, hight, thickness) |
| Paper panel size | 470x390mm (Length, width) |
| Carton size | 490x405x260mm (Length, width, height) |
Custom output voltage and current please see the following sheet (So you can find a suitable spec combination for your own application)
| Output voltage VDC | Output current Amp | Max ouput power Wattage |
| 5.0-8.0 | 0.01-3.0 | 15W |
| 8.1-16.0 | 0.01-2.0 | 18W |
| 16.8-25.0 | 0.01-1.07 | 18W |
Commercial terms and conditions
MOQ: 1000pcs
L/T: 30 working days
Incoterm: EX-works
Warranty: 12 months
Factory, philosophy
We're a reputable leading manufacturer has been devoting to external power supply (switch mode power supply unit, power adapter, charger) under the ISO9001 criteria for more than 15 years, our existing standardized products ranging from 1w to 360w, with output DC 5V to 55V, 0,01A to 16A, including wall mount, desktop, AC plug interchangeable. All products are certified by 62368 UL, cUL, FCC, CE, GS, UKCA, SAA, KC, PSE, moreover, we are proud to announce that our 240W GaN model carries IEC60601 CB report, which is ideal for medical grade application. Additionally, we offer customization service to meet different customer demand, our tailored power solutions have successfully added value to customers' unique and innovative projects, operations, greatly elevate the safety of the power adapter, procurement efficiency, significantly raise customer's competitivenss. Our enterprise philosophy is developed based on a strategy that is aiming to achieve the sustainability, meeting customers' demand is the paramount, the only thing that will satisfy our cutomers is the QUALITY, and our eternal duty is to deliver POWER. You can find us at the address No.124, Minsheng industry park, ShangCun Community, Guangming district, Shenzhen, Guangdong. We're always ready for your visit and inspection.
Thank you for browsing! Together, we can forge a bright future! And we're ready to answer your questions.
){kind=link}