Customization: | Available |
---|---|
Usage: | Laptop, Game Player, Digital Camera, Display, Device Charging, Replacement PSU, Universal PSU |
Output Type: | DC |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
* Industrial electronics
* Instrumentation
* Technology
Rated input voltage | 100-240Vac |
Operating range | 90-264Vac |
Rated input frequency | 50/60Hz |
Variation Frequency | 50/60Hz +/- 3Hz |
Rated input current | 2.0 A Max. |
Primary current protection | An adequate internal fuse on the AC input line is installed |
Power consumption (no loading) | 0.21W Max. (Input voltage 115V and 230V) |
Configuration | Class I Conductor |
Power Factor | 0.9Min Vin=230V/110V,Full load |
Dc output voltage | 24.0V |
Minimum load current | 0A |
Rating load current | 5.0A |
Rating output power | 120.0W |
Line regulation | The line regulation is less than ±5% while measuring at rated load and ±10% of input voltage changing. |
Load regulation | The load regulation for +24V is less than ±5%, at measured output load from 0% to 100% rated load . |
Ripple and noise | 150mVp-p Max. |
At 115/230Vac input and output Min and Max.Load, the ripple and noise are as follows when measure with Max. Bandwidth of 20MHz and Parallel 47uF/0.1uF, crossed connected at testing point. | |
Average Efficiency | 88.00% Min, At 115/230Vac input voltage,1/4,1/2,3/4 and full load calculation average efficiency. Adaptor meet efficiency level VI of DOE and Erp. |
10% Load Efficiency | 78.00%Min At 115/230Vac input voltage,10% load efficiency. |
Turn on delay time | 1Second Max.at 115Vac-230Vac input and output Max.load. |
Rise time | 100 mS Max.at 115Vac input and output Max load. |
Hold up time | 10 mS Min.at 115Vac input and output Max.Load. |
Over-shoot | 10% Max.When power supply at turn off/on. |
Over voltage protection | The power supply shall be hiccup mode, when the output is over voltage, and the power supply shall not be damaged and shall be self-recovery when the fault condition is removed. |
Over current protection | The power supply will be auto recovered when over current faults remove. |
Short circuit protection | The power supply will be auto recovered when short circuit faults remove. |
Temperature | Operating/: 0 oC +40 oC |
Non-Operating/: -20 oC +80 oC | |
Humidity | Operating: 10%~90% (Non Condensing) |
Non-Operating: 10%~90% (Non Condensing) |
For short | Country | Certified Status | Standard |
GS | Europe | MEET | EN 62368-1 |
CE | Europe | MEET | EN 62368-1 |
UL | USA | MEET | UL 62368-1 |
CUL | Canada | MEET | CAN/CSA C22 2 NO.62368-1-14 |
FCC | USA | MEET | FCC PART15 |
UKCA | Britain | MEET | BS EN62368-1 |
PSE | Japan | MEET | J62368-1 |
Radiated and Conducted Emission | EN55032, Class B for radiated and conducted emissions FCC PART 15, Class B for radiated and conducted emissions GB9254, GB17625.1 |
Electrostatic Discharge Immunity |
EN 61000-4-2
energy storage capacitance of 150pF, and discharge resistance of 330Ω, 8KV air discharge, 4KV contact discharge. |
Radiated Field Immunity |
EN 61000-4-3 Frequency Range: 80-1000MHz Field Strength: 3 V/m with 80% amplitude modulation of 1 kHz Performance Criteria A Radio-frequency electromagnetic field susceptibility test, RS 80-1000MHz, 3V/m, 80%AM(1KHz) |
Fast Transient Immunity |
EN 61000-4-4
|
Surge Immunity |
EN 61000-4-5
|
Power adapter size information:
Size: 171.4x72.1x31.6mmDie-cut partition A size | 470x76x2mm (Length, height, thickness) |
Die-cut partiton B size | 390x76x2mm (Length, hight, thickness) |
Paper panel size | 470x390mm (Length, width) |
Carton size | 490x405x180mm (Length, width, height) |
CUSTOM OPTIONS
Custom output voltage and current please see the following sheet
Output voltage VDC | Output current Amp | Max ouput power Wattage |
12.0-17.9 | 0.01-10.00 | 120W |
18.0-25.0 | 0.01-7.5 | 144W |
25.1-29.9 | 0.01-5.5 | 144W |
30.0-36.0 | 0.01-5.0 | 150W |
Together, we can forge a bright future! Thank you for browsing, And we're ready to answer your questions.